DENAIR

Desiccant Dryer — Heatless

Heatless desiccant dryers with regeneration via purge air (12–15% of capacity). Pressure dew point -20°C.

1.2 – 130.0 m³/minKapasiteetti

Mikä on adsorbenttikuivaaja?

A heatless desiccant dryer dries compressed air to extremely low moisture levels (pressure dew point -20°C) using adsorbents such as activated alumina or molecular sieves. This technology is necessary when ordinary refrigerated drying is insufficient — for example in cold environments, cold storage, or processes in the food and pharmaceutical industries where moisture can cause serious quality problems.

The system operates with two towers that alternate between drying and regeneration. The heatless variant regenerates the desiccant by using a portion of the already dried compressed air (12–15% of capacity), providing a simple and reliable design without the need for external heating. Inlet oil content below 0.01 ppm is required for optimal function.

With capacities from 1.2 to 130 m³/min, there are models for everything from smaller installations to large industrial systems. The heatless desiccant dryer is the cost-effective choice when a pressure dew point of -20°C is sufficient and simplicity of operation is prioritized.

Oletko kiinnostunut?

Autamme sinua löytämään oikean ratkaisun yrityksellesi.

Lataa tuotetiedote

KUVA TULOSSA PIAN

Tuoteluettelo

Lataa luettelo (PDF)

Avainominaisuudet

Pressure dew point: -20°C

Purge air: 12–15%

Adsorbent: Activated alumina or molecular sieves

Inlet oil content: <0.01 ppm

Working period: T=4–20 min

Mallit ja tekniset tiedot

Malli	Art.nr	Paine	Kapasiteetti	Paino	Mitat	Pdp
DAD-1MXF	31-11000	6–10 bar	1.2 m³/min	120 kg	910×400×1620 mm	-20°C
DAD-2MXF	31-11000	6–10 bar	2.4 m³/min	145 kg	910×400×1530 mm	-20°C
DAD-3MXF	31-11001	6–10 bar	3.6 m³/min	160 kg	910×400×1860 mm	-20°C
DAD-6MXF	31-11003	6–10 bar	6.0 m³/min	245 kg	1000×450×1860 mm	-20°C
DAD-10MXF	31-11004	6–10 bar	10.0 m³/min	405 kg	1200×500×2020 mm	-20°C
DAD-15MXF	31-11006	6–10 bar	15.0 m³/min	560 kg	1200×500×2420 mm	-20°C
DAD-20MXF	31-11007	6–10 bar	20.0 m³/min	620 kg	1400×650×2560 mm	-20°C
DAD-30MXF	31-11008	6–10 bar	30.0 m³/min	1 170 kg	1400×750×2630 mm	-20°C
DAD-40MXF	31-11010	6–10 bar	40.0 m³/min	1 460 kg	1400×800×2750 mm	-20°C
DAD-50MXF	31-11011	6–10 bar	50.0 m³/min	1 820 kg	1750×800×2800 mm	-20°C
DAD-60MXF	31-11012	6–10 bar	65.0 m³/min	2 020 kg	2000×900×2850 mm	-20°C
DAD-80MXF	31-11013	6–10 bar	80.0 m³/min	2 410 kg	2100×1050×2980 mm	-20°C
DAD-100MXF	31-11014	6–10 bar	100.0 m³/min	2 800 kg	2300×1650×3300 mm	-20°C
DAD-120MXF	31-11015	6–10 bar	130.0 m³/min	4 020 kg	2600×1650×3300 mm	-20°C
DAD-3WXF	31-11002	6–10 bar	3.8 Nm³/min	—	—	-20°C
DAD-10WXF	31-11005	6–10 bar	10.7 Nm³/min	—	—	-20°C
DAD-25WXF	31-11009	6–10 bar	28.0 Nm³/min	—	—	-20°C
DAD-120WXF	31-11016	6–10 bar	130.0 Nm³/min	—	—	-20°C

Sertifioinnit

CEISO 9001

Valmis jäsenneltyyn energiadialogiin?

Ota meihin yhteyttä teknisen konsultaation saamiseksi. Autamme sinua järjestelmäarvioinnissa ja optimoinnissa — olipa kyse BESS:stä, kompressoreista tai hybridiratkaisuista.

Ota yhteyttä